How To Networking

How to install new Router Things You Need to Do Immediately After Plugging In Your New Router

Written by techmanish

Most people don’t replace their routers that often, and there are so many important settings, it’s easy to overlook a few and forget how your old one was set up. Here are the first five things you need to do right after powering up your new router.

Most people don’t replace their routers that often, and there are so many important settings, it’s easy to overlook a few and forget how your old one was set up. Here are the first five things you need to do right after powering up your new router.

Although we’ve included screenshots showing different settings in different router interfaces, every router is different—please refer to the documentation for your specific router to locate all the settings we refer to throughout this tutorial.

Update the Firmwareximg_52eaa62c1d2a6-png-pagespeed-gpjpjwpjjsrjrprwricpmd-ic-i5bnpdkxyw

Your router’s firmware is a set of operating instructions and tools stored on its memory chip that controls everything from the Wi-Fi radios to the firewall.

Although firmware updates are generally infrequent, and router firmware is designed to be stable, there are two reasons to check for updates immediately after getting a new router. First, you don’t know how long your router was sitting on the shelf, and a new update may have been (and most likely was) released.

Second, although not as common as problems on consumer operating systems like Windows, there are exploits and vulnerabilities that crop up in router firmware, so it’s always good to have the latest (and most secure) firmware available. It also means you have access to the most up-to-date features of the router.

Change the Default Login Password


Just about every router ships with a default username and password you use to manage the router. These defaults aren’t even well kept secrets—a simple Google search will tell you the username and password for just about any router out there. You can download entire lists of known pairs, and there’s even the appropriately named web site RouterPasswords where you can look up just about any make, model, and default login. Usually they’re something ridiculously simple, like “admin/admin”.

So, if you don’t want it to be stupid easy for passers-by to break into your network, you should change your administrator password…before someone changes it for you.

Change the Wi-Fi Network Name (SSID)


Your Wi-Fi’s network name, or SSID, can reveal a lot about the router. For example, it might be called “Linksys”, which lets outsiders know the manufacturer of your router—making it easier for them to fetch the default login, or check for vulnerabilities on that model.

Change the SSID to something different from the default, but without any identifying information in it. This means no SSIDs like “Apartment5a” or “321LincolnSt”. Something easy to remember but unspecific to you is ideal—like “Cookie Monster” or “Spaceman”. Any combination of words will do,. really.

Set a Secure Wi-Fi Password with Quality Encryption


For years, router manufacturers shipped routers with poorly configured Wi-Fi and/or default passwords enabled. Now, they’re finally starting to ship routers with the highest level of Wi-Fi encryption enabled and a randomized password set (so even if new users don’t know what they’re doing or fail to look up a list like this one, they’re still protected).

 Not every manufacturer has individualized setups for each router they ship, however, which means it’s your responsibility to make sure your router has properly configured Wi-Fi with a secure password and the best encryption.

When you go to change your Wi-Fi network’s password, you’ll typically have options available like WEP, WPA, and WPA2. Select WPA2 (or, to future proof this advice, whatever better encryption comes along). We recommend using WPA2. You can read about Wi-Fi encryption and why it matters here, but the short of it is that anything below WPA2 is easier to crack. WEP is so trivial to crack a child with the right (and widely available) tool could do it.

As far as passwords are concerned, when you’re using strong encryption like WPA2 that supports up to 63 characters, it’s far better to use a passphrase than a password. Forget simple passwords like thedog20, blackcat, or any of the trivial passwords that Wi-Fi standards used to restrict us to. Passphrases are easier to remember and are harder to crack. Instead of “thedog20”, use “My Dog Is Twenty Years Old”.

While we’re on the topic of securing your Wi-Fi: if you have a newer router, chances are you have a guest network. If you choose to enable it, the same rules apply for selecting good encryption and a strong password. We also recommend you check out our dedicated article about securing guest networks and how they may not be as secure as you think.

Disable Remote Access


If you need remote access for some reason, it’s a pretty handy feature. For 99.9% of home users, however, there’s very little reason they would need to remotely administer their router from afar, and leaving remote access on simply opens up a point of vulnerability that hackers can take advantage of. Since the router not only functions as the network management brain of your home network but also the firewall, once a malicious user has gained remote control, they can open the firewall and gain complete access to your home network.

Again, like better Wi-Fi security, manufacturers are finally taking default security seriously, so you might be pleasantly surprised to find that the remote access/management features are disabled. Still, trust but verify. Look in the advanced settings of your router and confirm that any remote access tools are turned off.

Disable WPS and UPnP

Finally—compared to the previous examples of security measures you should take—we have a more arcane one: disabling Wi-Fi Protected Setup (WPS) and (Universal Plug and Play) UPnP. While both services are intended to make our lives easier, they both have various security flaws and exploits. WPS allows you to press a button on your router or use a PIN to pair your new devices to your router (instead of manually searching for the Wi-Fi network name and entering the password) but there are flaws in WPS that aren’t worth the convenience. If your router supports disabling WPS, it should be easily found in your router’s menus.

By simply updating your firmware, changing default logins for the router and Wi-Fi access, and locking down remote access, your 10 minutes of effort ensure that your router is now radically more secure than when it came out of the box.

Have a networking or Wi-Fi related question? Shoot us an email at and we’ll do our best to help.


About the author


Leave a Reply

%d bloggers like this: